Oracle Data Relationship Management
Release 11.1.2.4.000 Patch Set Update (PSU): 11.1.2.4.345
Readme
New User Privileges for Oracle Repository
Enterprise Performance Management Architect Patch
Defects Fixed in Patch 11.1.2.4.344
Defects Fixed in Patch 11.1.2.4.343
Defects Fixed in Patch 11.1.2.4.342
Defects Fixed in Patch 11.1.2.4.341
Defects Fixed in Patch 11.1.2.4.340
Defects Fixed in Patch 11.1.2.4.330
Defects Fixed in Patch 11.1.2.4.321
Defects Fixed in Patch 11.1.2.4.320
Defects Fixed in Patch 11.1.2.4.311
Defects Fixed in Patch 11.1.2.4.310
Defects Fixed in Patch 11.1.2.4.302
Defects Fixed in Patch 11.1.2.4.301
Applying this Patch for Data Relationship Management
Applying this Patch for Data Relationship Management Analytics
Rolling Back this Patch for Data Relationship Management
Rolling Back this Patch for Data Relationship Management Analytics
This Readme file describes the defects fixed in this patch and the requirements and instructions for applying this patch.
Caution: You are urged to carefully read and understand the following requirements. Failure to comply may result in applying a patch that can cause your application to malfunction, including interruption of service and/or loss of data. Before installing or applying this patch:
Verify that your system configuration (product version, patch level, and platform) exactly matches what is specified in the Readme.
If this patch will replace an existing 11.1.2.4.x installation, related components such as Hyperion Foundation Services are not affected. However, upgrading from a release prior to 11.1.2.4.x will require an upgrade of Foundation Services to 11.1.2.4.
This is the thirteenth patch on the 11.1.2.4.000 release.
You can apply this patch to the following Data Relationship Management releases:
To |
|
Release 11.1.2.x |
Release 11.1.2.4.345 |
Release 11.1.1.4.x |
Release 11.1.2.4.345 |
Release 11.1.1.0.x to 11.1.1.2.x |
Release 11.1.2.4.345 |
An environment that includes multiple releases, which can include an environment with one instance of Shared Services or an environment with two instances of Shared Services |
See “Upgrading from an Environment with Multiple Releases” in the "Upgrading EPM System Products" chapter in the Oracle Hyperion Enterprise Performance Management System Installation and Configuration Guide. |
Notes:
If you are starting from an earlier release, Oracle recommends that you upgrade to the highest level release that directly supports upgrade from your starting release.
For supported upgrade paths for Foundation Services and other EPM System Products, see Oracle Enterprise Performance Management System Readme.
When upgrading from a Data Relationship Management release
prior to 11.1.2.4.330, additional database privileges are required to use
release 11.1.2.4.345 with an Oracle repository. Before running the Apply
Updates process on the repository, the existing schema owner must be granted
two additional privileges:
GRANT CREATE TYPE, CREATE SEQUENCE TO <user>;
This step is not required when upgrading from release 11.1.2.4.330 or later or when creating a new Oracle repository since these privileges will be automatically applied to the new user. This step is also not required when using a SQL Server repository.
Use the user account that has Local administrator rights and was set up for installation and configuration. This user must be an administrator and should be the same for all EPM System products installed on the machine. This Windows user requires the following local policies to be assigned:
· Act as part of the operating system
· Bypass traverse checking
· Log on as a batch job
· Log on as a service
The Oracle Data Relationship Management installer should be "Run As Administrator" in order to execute properly.
To ensure proper performance, it is strongly recommended that Windows pagefile size on the DRM server be at least 1.1 times system memory with growth allowed up to 1.5 times system memory. When system memory is large (e.g. 64 GB and higher) the pagefile can be maintained at 1.1 times system memory. Pagefile sizes smaller than this can lead to serious performance and functional issues.
In order to successfully integrate Data Relationship Management and Enterprise Performance Management Architect, the following patch must be applied: Oracle Enterprise Performance Management Architect, Fusion Edition Release 11.1.2.4.000 Patch Set Exception (PSE) 22078964.
The minimum patch level required for Microsoft .NET is now 4.5.2.
N/A
Refer to the Oracle Data Relationship Management Addendum on the Help Center (http://docs.oracle.com/cd/E57185_01/nav/datamanagement.htm) for the latest updates to the documentation.
Applies to all supported platforms. When using Data Relationship Management Analytics with Oracle Database 11.2.x, the minimum patch level required is 11.2.0.4.
This patch can be applied to all languages supported in release 11.1.2.4.320 of Oracle Data Relationship Management. For the Oracle Enterprise Performance Management System Supported Platform Matrix, go to: http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html.
Defect Number |
Defect Fixed |
•24804145 |
Common User Provisioning: Users node access groups not displaying all users |
•24824996 |
Now(Datetime) function returns time offset by 7 from server |
•25225148 |
Workflow calculations not recognizing node name with trailing space |
•25326717, 25312730 |
Document that DRM does not install to the default web site by default |
•25408733 |
Description for shared node not updating properly when Description for primary is updated |
•25529302, 26738415, 26330375 |
Blend operation gets error: "An item with the same key has already been added" |
•25918412 |
Node name case change allowed even when editable is false in upload file |
•26001488 |
Inserting a request does not support local properties |
•26325057, 26732108 |
Javascript error on page using Firefox 52 ESR |
•26337556 |
Mapping external groups to node access groups gets error: "Array dimensions exceeded supported range" |
•26374124 |
External lookup property does not fire after blending |
•26396269 |
Interactive users allowed to delete orphan nodes |
•26397737 |
Property of Date data type can return value offset by 1 day |
•26478028 |
Validating request gets error: "String must be exactly one character long" |
•26496485 |
Workflow performance issue when bringing up parent selector |
•26497660 |
As Of version not including change to some property values |
•26566155, 26725244 |
Emails from workflow requests being delayed |
•26791013, 26546993 |
Sorting items in a request can change the data within the items |
•26914352 |
Javascript not returning node objects and structured arrays as in previous releases |
Defect Number |
Defect Fixed |
•20448614 |
Need to document which formula functions are only valid for specific global/local context. |
•24384536 |
Need to document that notification emails are not sent to the user that performed the action. |
•24704217 |
Allow external users to be provisioned to Stats and Shared Info property categories. |
• 24750557 |
Error "Value cannot be null" in DRM when external node access group deleted in HSS. |
•24804145 |
When external group contains multiple groups, only the users from the first group get displayed in DRM on User and Node Access Group pages. |
•25170195 |
When searching on node selector for property of data type Leaf Node, the search should include Limb and Leaf nodes. |
•25172391 |
Property of Associated Node type that is also Derived can get error when updated: "DRM-25027: Invalid property type: Derived" |
• 25185730 |
Validation appears to fail due to issue with ListRelatedNodesWith() and IsDefinedPropValue() functions. |
• 25299124, 25361454 |
Need to document current behavior for escaping quoted strings in exports. |
•25423313 |
Modifying external connection gets error "An item with the same key has already been added." |
•25463813 |
Hyperlink property not working when URL contains percent sign. |
•25477365 |
Not able to create external connection using web balancer. |
•25477724 |
Workflow request using external lookup that retrieves multiple properties not working correctly. |
•25478414 |
Local derived property on a shared node that reference Description appear to use value from shared node instead of primary node. |
•25490175 |
When external lookup property has 2 columns that reference each other, the value for second column may not display correctly. |
•25505050 |
Case sensitivity issue when adding shared node can cause case difference between primary and shared node. |
•25607311 |
API method GetVersions return a duplicate for variable assigned to a version variable. |
•25816023 |
External lookup values not properly saved when version saved. |
•25870897 |
Calculate Name function only works on the first item of the workflow request. |
Defect Number |
Defect Fixed |
•15863761 |
Transaction audit filtering is case sensitive. |
• 19921447 |
RemoveProp on a global, defined, ListGroup property does not work manually. |
•20456656 |
Not able to get appropriate response for API call StartHierExportByName(). |
•20779105 |
For Associated Nodes property, the Select Nodes area of dialog is moving over the previous selection. |
•21627992 |
Saving copied version gets error message: The Insert statement conflicted with the Foreign Key constraint. |
•23124986 |
Request Age on worklist resets to 0 after request committed/rejected. |
•23508088 |
Shared node children not displaying property correctly. |
•23556445 |
DRM data format not using system region format selected. |
•23578579 |
DRM memory footprint continues to rise when saving versions. |
•23594462 |
Error when name of View From member gets changed. |
•23710595 |
Action script does not load quoted values correctly. |
•24289544 |
Sort order and sort limbs first not working correctly. |
•24332592 |
Workflow item in details not showing correctly: showing default in Current Value but showing current value in New Value. |
•24506101 |
Session not terminated when running books via batch. |
•24573185, 24683570 |
Export performance slow in 330 release. |
•24574224 |
Error "Node cannot be added as a child of parent node" when adding sibling to shared node. |
•24660412 |
Validation error of missing child dependency when javascript has property reference. |
•24663618 |
Version copy being attempted on version that has not been loaded. |
•24674558 |
Load status for large version never gets updated to Loading from Initialized. |
•24737962 |
Unable to expand certain shared node hierarchy. |
•24791069 |
DRG does not update local properties on shared nodes. |
•24810108 |
Running export books and compare exports will flip previous version with current version. |
•24826257 |
Books created at the API do not allow configuration of CombinedFileCodePage. |
•24836960 |
Split workflow task getting stuck on skipped stage. |
•24897933 |
Copy option not working correctly in IE11. |
•24906620 |
Node Access Group rights not applied correctly for Access Manager role. |
•24958942 |
Property delete causes timeout due to dependency checking. |
•25192124 |
Workflow task that calculates name based on derived property requires extra step. |
Defect Number |
Defect Fixed |
•23206774 |
Uploading requests from file that contains extra blank lines causes the upload process to not complete. |
•24305531 |
Editable Boolean property with True value can incorrectly change to False at workflow approval stage. |
•24344955 |
Javascript validation on move operation gets unexpected null reference error when trying to reference value set before the move. |
•24355659 |
Workflow request with defined string property does not display current overridden value in the new value field. |
•24375436 |
Workflow incorrectly using explicit blank value when clearing properties. |
Defect Number |
Defect Fixed |
•21674948 |
Cannot clear and save the value of a List Group property. |
•21950498, 23084107 |
Version save error can cause stranded Baseline versions. |
•22257123 |
Repeatedly opening and closing property definition can cause: "HTTP Error 400. The size of the request headers is too long" |
•22782594 |
Selection does not stay on the same node when moving between hierarchies. |
•22862180 |
Generation export displays incorrect ancestor chain for implicit shared nodes when there is an extra limb node between the shared node and the leaf. |
•22972578 |
Formula function NodePropValue not handling null reference correctly causes error in workflow: "Object reference not set to an instance of an object" |
•23019639 |
Validation dependency check
causes error: "An error occurred while running validations: DRM-63014:
Parent object |
•23063594 |
Migration utility alllows loading property with spaces in the name. |
•23098294 |
Workflow does not process conditional stage correctly for Insert task. |
•23139193 |
Workflow task does not display floating point values consistently based on language setting. |
•23173391 |
Workflow task with derived Boolean property not processed correctly. |
•23195401 |
API call searchForNodesInHier does not return ParentName in response as expected. |
•23254470 |
Apply Updates to repository gets
error: "Violation of Primary Key constraint
'PkRmConnectionAllowedTable'. Can not insert duplicate key in object
'dbo.RM_Connection_Allowed_Table. The |
•23270834 |
Hierarchy Difference export on Structure and Core.Parent property gets error "DRM-23081: Export was unable to run due to the following error: An item with the same key has already been added." |
•23317394 |
Generation export using fixed width columns does not retain updates to column widths. |
•23341151 |
Unable to expand specific hierarchy when nodes per page set to 1000. |
•23538440 |
Expanding to implicit shared node hides remainder of hierarchy. |
•23595066 |
Unable to find certain nodes in hierarchy based on how many levels are expanded. |
The following defects are fixed in this patch for Data Relationship Management Analytics.
Defect Number |
Defect Fixed |
•23206797 |
On Change Dashboard, updating the filter while the Graph View page is displayed can cause incorrect count for Property Changes. Applying the filter again on List View page will resolve the issue. |
Defect Number |
Defect Fixed |
•16050672 |
Saving validation gives warning message and then saves opposite. |
•20555192 |
Invalid property type {0} when add members as sibling with derived sort order. |
•21208809 |
Performance impacts on exports due to user security. |
•21810750 |
Performance impacts on action scripts that trigger javascript validations. |
•21918004 |
When installing individual components instead of doing a Complete install, the documentation files only get included with the Application Server component. |
•22241380 |
Performance impacts when browsing large, flat hierarchy. |
•22370818 |
Enriching user unable to see properties submitted until after approval. |
•22518434 |
Performance impacts on node selector dialog when calculating node type. |
•22526723 |
Implicitly shared leaf nodes not showing in hierarchy. |
•22540494 |
In some environments, when attempting to connect to an Oracle database, the DRM Console will close with an unhandled exception. |
•22547806 |
Workflow submit fails when real-time Move validation enabled on hierarchy. |
•22576102 |
Export run via batch client does not handle version parameter with correct precedence. |
•22609094 |
In some cases, the inclusion of a derived Boolean property for informational purposes in a Data Governance Request task may present a error indicating the property cannot be updated when the request is submitted. |
•22658208 |
List property allows update with empty value via action script. |
•22706145 |
Javascript formula unable to return value for Core.SharedMap_MDM |
•22743357 |
When searching for a node not in current view, the found node should be scrolled into view. |
•22782594 |
Selection does not stay on the same node when moving between hierarchies. |
•22813597 |
List properties in workflow task not displaying correctly in IE11. |
•22813726 |
Some text in workflow not translated to French. |
•22835524 |
Property selection issue when adding new validation to a workflow task. |
•22893822 |
Creating external lookup property gets object reference error. |
•22910781 |
Node selector not presenting nodes for move to which user should have access. |
The following defects are fixed in this patch for Data Relationship Management Analytics.
Defect Number |
Defect Fixed |
•22189920 |
Workflow requests that get auto-committed will not be reflected in the Analytics module. |
•22583344 |
Analytics module not currently run as a managed service. |
•22649770 |
On login page for Analytics, hitting <Enter> key after typing invalid credentials will display an error page with "Internal Server Error" |
•22665638 |
Using certain regional settings, new nodes in a newly added version may not be reflected in the Growth dashboard. |
•22666625 |
Uninstall process for Analytics module should be more fully documented. |
•22916833 |
User with Data Manger role should be able to see all versions in Change dashboard without being granted node access. |
Defect Number |
Defect Fixed |
•19459973 |
Leaf node may temporarily disappear after being moved under another limb node. |
•20619595, 20638448 |
EPMA Export always exports the value of #root for the parent name for the Top Node of a hierarchy, even when that value has been overridden. |
•21608251 |
When user has Access Manager role, formula function NodeAccessGroups() returns all node access groups in system instead of just those that apply. |
•21674316, 21786868 |
Generation Export incorrectly handles implicit shared node found in ancestor list. |
•21690564, 22143793 |
Export based on hierarchy group should use the hierarchy sort order defined. |
•21697854 |
Adding a new list value to a list property from the property grid does not save the new value correctly. |
•21848371 |
Version restored from file could have conflict with existing hierarchy ID. |
•21915924 |
Approving user is not able to view a request after the submitting user has been deleted from the system. |
•21961278 |
When using Internet Explorer, exporting to an existing file that is currently locked will download invalid data. |
•22011949 |
In workflow task, node selector dialog may not populate correctly based on node access group filtering. |
•22065377 |
When inserting node via workflow task, some property values from new hierarchy not displayed correctly. |
•22120150 |
Submitting user of a workflow task incorrectly receives notifications for subsequent stages that should only go to Assignees. |
•22122789 |
Apply Updates process taking too long for new content introduced in 11.1.2.4.320. |
•22126839 |
When downloading a hierarchy page into a spreadsheet, blank lines are inserted for branches not fully expanded. |
•22160188 |
Timeout error received when deleting a validation due to dependency checking process. |
•22226260 |
Workflow request not fully validating parent~node format. |
•22234176, 21953276 |
When large value encountered during bulk insert operation, system can remain in single insert mode causing version save operation to take significantly longer. |
•22241395 |
Migration extract file shows object access group as System instead of Standard. |
•22262177, 22514388 |
Saving version restored from file gets ORA-02291: integrity constraint violated - parent key not found. |
•22264989 |
Migration difference file incorrectly lists object access group as System. |
•22307027 |
Data Creator role should not allow creating As-Of versions. |
•22331158 |
Export does not include values for derived, overridable hierarchy level properties. |
•22497054 |
Workflow request gets error after multiple inserts: "node does not exist in hierarchy" |
•22520386, 22546811 |
Node selector dialog not displaying nodes correctly on page 2. |
•22526723 |
Implicit shared nodes not displayed correctly when descendants of implicit shared nodes. |
•22590522 |
Batch client export uses the version variable saved with the export profile instead of the version specified in the batch client parameter. |
•22609268 |
Repository upgrade not allowed when user-defined artifacts have been added to the repository. |
Defect Number |
Defect Fixed |
•22114822 |
Lineage version property was being incorrectly set on Baseline versions. This could cause error when deleting a version: "DRM-12037: Cannot update properties for a baseline or As-Of version." |
•22176473 |
Repository upgrade process was initializing some node statistics and could take a long time in some environments. Since these values are not yet utilized in the current release, this part of the upgrade process was removed for now. |
•22198882 |
When creating user names, the comma and period characters are not allowed. These characters should be allowed in order to match the behavior of previous releases. |
Defect Number |
Defect Fixed |
•16478033 |
ENABLE USER TO SELECT DOMAIN FOR ADDING A NEW DOMAIN NODE |
•16499579 |
CHANGES TO COLUMN/PROPERTY SELECTION NOT REFLECTED IN QUERY RESULTS |
•16528292 |
AUDIT NOT LOGGING CORRECTLY WHEN MOVING A NODE |
•17476381 |
UNABLE TO SELECT MULTIPLE EXPORTS TO ASSIGN TO A BOOK |
•17487528 |
COMPARE QUERY RESULTS - IN TREE VIEW, PREVIOUS VERSION DETAILS ARE DISPLAYED |
•18017867, 20127325 |
WORKLIST IDS DO NOT SORT CORRECTLY WHEN THERE IS MORE THAN ONE PAGE OF IDS |
•18112008 |
LEAF NODE REQUESTS REFER TO THE PARENT NODE NAME AND NOT THE ID IN WORKFLOW |
•19780378 |
HIERARCHIES FROM FINALIZED VERSIONS CAN BE DELETED BY ACTION SCRIPT |
•19906665 |
REMOVE DUPLICATES FEATURE NOT WORKING CORRECTLY IN SOME CASES |
•19925239 |
USER SESSIONS ARE STAYING OPEN |
•20026950 |
"COULD NOT READ INT16" ERROR WHEN RESTORING A VERSION |
•20332563 |
ACTION SCRIPT DOES NOT ESCAPE PAIR OF DOUBLE QUOTES |
•20359741 |
SELECT NODE DIALOG DOESN'T DISPLAY WELL BELOW 16TH LEVEL |
•20655175 |
API CALL: CREATEBOOK/UPDATEBOOK DOESNT ADD THE BOOKITEM |
•20765610 |
TOP NODE CAN BE CREATED THAT IS NOT UPPERCASE (SYSTEM PREFERENCES ISSUE) |
•20828266 |
DEFAULT PROPERTY CATEGORY NOT INITIALIZED IN DB FOR NEW USERS |
•21035822 |
CREATE AS OF VERSION SHOWS INCORRECT TIMESTAMP WHEN EXECUTED COMPARISON EXPORT |
•21049850 |
HAVE PROPERTY CATEGORIES RETAINED WHEN ROLES ARE ASSIGNED OR UNASSIGNED |
•21123666 |
VIEW NODE PROPERTIES ICON FROM THE VERSION BROWSE/SEARCH IS GRAYED OUT |
•21186733 |
CHOOSING STAY ON PAGE WITH UNSAVED PROPERTY CHANGES NOT WORKING PROPERLY |
•21203005 |
HIERARCHY GROUPS DON'T STAY COLLAPSED |
•21234341 |
ERROR SAVING RESTORED VERSION |
•21239104 |
OBJECT REFERENCE ERROR INSERTING SHARED NODES WHEN UPNAME SYS PREF TO TRUE |
•21288621, 21288654 |
ISSUES WITH FIREFOX 38.X SUPPORT |
•21321591 |
QUERY WITH CONTAINS NOT FUNCTIONING PROPERLY (Previously, the query operator "Contains" functioned as a string match for the specified string. Now this operator will look for the specified string as a member in a list property.) |
•21322574 |
ALLOW REMOVAL OF DESCRIPTION FROM WORKFLOW TASKS |
•21349624 |
GENERATION EXPORT WITH EXCLUSION FILTER DOES NOT SAVE |
•21365909 |
UNABLE TO TELL SYSTEM VERSES STANDARD OBJECTS IN SHORTCUTS |
•21377199 |
OBJECTACCESS=SYSTEM DOES NOT WORK AS PART OF GENERAL SECTION IN MDM_CONNECT |
•21385233 |
VERSION FILE WILL NOT IMPORT ERROR: AN ITEM WITH THE SAME KEY HAS ALREADY BEEN LOADED |
•21423398 |
ENHANCEMENT TO TYPE TO SELECT FROM LIST |
•21495054, 21785508 |
JAVASCRIPT PROPERTIES SHOWING CALCULATION INACCURACIES DURING CONCURRENT BATCH OPERATIONS |
•21525113 |
ORPHAN TAB SHOWS NO ORPHANS, BUT 250+ ARE KNOWN TO EXIST |
•21613653 |
UPLOAD FILE / HIERARCHY RESTRICTION DOES NOT WORK SIMULTANEOUSLY |
•21635891 |
DRM TASK MANAGER ERRORS EVERY 3 MINUTES |
•21667465 |
UNABLE TO SAVE VERSION |
•19931714 |
LIST TAB STAYS ON LOADING IN PROPERTY DEFINITION |
•21288474 |
VARIOUS TRANSACTION HISTORY ISSUES |
•20788128 |
IMPORT FIELD WITH UNMATCHING QUOTES CAN CAUSE INCORRECT ROW PARSING |
•21113925 |
KICKED BACK TO WORKLIST PAGE WHEN TRYING TO ADD AN ITEM ON IE11 |
•21793777 |
DRM SERVICE WILL NOT START PROPERLY WITHOUT AT LEAST ONE ENABLED APPLICATION |
•21748200 |
PROP.ORIGIN REPORTING INCORRECTLY |
Defect Number |
Defect Fixed |
•21147577 |
When adding certain roles (Interactive User, Data Creator, Data Manager, Application Administrator) to a user via API and then trying to retrieve the user details via GetUser(), an exception is returned. |
•21251134 |
When loading a version into memory from the database, some of the relationships may not load properly causing nodes to be loaded as orphans instead of hierarchy nodes. Version back-ups to file and Version copies made when this condition exists will restore with orphan nodes. New version back-ups/copies should be made and confirmed. |
Defect Number |
Defect Fixed |
•14606340 |
Dependency checking not functional for java script objects. |
•17408364 |
Not able to override the model filter at the workflow task level. |
•17910872 |
Parent node selection on workflow task is not in alphanumerical order. |
•18056283 |
Validation scripts sometimes cannot be saved. |
•18454097 |
Install wizard not installing IIS virtual directories in 11.1.2.3.500. |
•18634416 |
Need better performance on node selector pop-ups. |
•18637380 |
Float default value not saved to repository with decimal separator in non EN-US. |
•18856166 |
Slow performance browsing large hierarchies in workflow client. |
•19501118 |
Property dependencies not showing accurately in DRM or migration client. |
•19570351 |
When a request is rejected after lines added, submitting user is unable to copy. |
•19931727 |
Need ability to have mouse over on property show qualified property name and label. |
•20305345 |
Parameter "Ancestor Sequence #" not working properly in Generation Export. |
•20326714 |
Generation Export producing different results in 11.1.2.3.304. |
•20347578 |
Workflow has 2 items, Add plus Insert. Commit stage can change node name on both. |
•20563463 |
Workflow task name (not label) displayed on bulk upload form. |
•20638160 |
List property allows Null value via action script. |
•20655175 |
CreateBook/UpdateBook API call does not add the BookItem. |
•20671302 |
Hierarchy tree browse does not resize content based on content length. |
•20701671 |
RemoveProp action should not apply to Description property. |
•20732255 |
Export book not in conformance with new structure fails to throw error. |
•20883082 |
More than 2 back-to-back splits results in only 2 requests. |
•20898220 |
DRM NET JNI Bridge initializing and immediately reaching java max heap size. |
•20916928 |
DRM-61045 error when registering DRM in the Console. |
•21044462 |
Properties are copying over between request items in the same request. |
•21051440 |
Changes to Property Definition table are not effective until service restart. |
•21078280 |
Inclusion of required global node property in workflow task disables a string field. |
Defect Number |
Defect Fixed |
•20686185 |
When creating an import using an external connection to a database, the tables are available to map but not the views. |
•20689463 |
The temporary folder for ASP.NET files used by the web client was created in a different directory (C:\ade\alm-git) in the 11.1.2.4.301 release. After installing the 11.1.2.4.302 release, the files will now reside in the correct location and the C:\ade\alm-git directory can be deleted. |
•20700140, 20722658 |
Process used to support external user authentication (drm-netjnibridge-host.exe) does not start properly in Windows 2012 environment. |
•20724530 |
Creating an external connection to a database view on MSSQL gets error when saving. |
•20751745 |
Importing values with unexpected quotes can cause lines to be processed incorrectly with no warning message. |
Defect Number |
Defect Fixed |
•20257241 |
Certain export types are not applying the Node Selection setting correctly (All Nodes, Limb Nodes Only, Leaf Nodes Only) |
•20305952 |
Action script messages display some French language characters incorrectly. |
•20365524 |
Script that adds and deletes the same node can get object reference error. |
•20394117 |
As-Of version with the same date offset cannot be created after the original version was deleted and recreated. |
•20412802 |
Running Generation Export with Hierarchy Group selection gets error: "DRM-23067: Export is not runnable." |
•20416861, 20570176 |
When a request is pushed back to the Submit stage, it is not assigned to any Node Access Group. |
•20447178 |
When deleting and adding node types via the API, get error "DRM-12150: A Node Type with the name xxx already exists" |
•20448761 |
Need new web service call that will return glyph name based on glyph id. |
•20466646 |
When copying a version, properties such as Status, Owner and Copy Time may not be correctly populated. |
•20466820 |
User name field is not populated for an attachment until the request is saved. |
•20466966 |
Hierarchy Group constraint on workflow task property is not correctly limiting the available hierarchies for selection. |
•20474599 |
Workflow metadata cannot be deleted while a version delete is pending. |
•20507239 |
Node access rights not properly enforced for editing custom properties. |
•20507304, 20538644, 20554885 |
Node access rights not properly applied to node in alternate hierarchy. |
•20508420 |
Blending selected hierarchies into version where they do not exist gets error: "DRM-21026: Invalid target Hierarchy specified" |
•20533476 |
Hierarchy constraints for node data type properties are not persisting correctly. |
•20563793 |
Importing a hierarchy containing a duplicate limb node which has duplicate descendants gets error: "An element with the same key but a different value already exists" |
•20570738 |
When one of the items in a request fails a real-time validation, the remaining items in the request are still being committed instead of all being rolled back. |
•20577231 |
Request activity for the Unclaim action should show no user. |
•20602901 |
Synchronize not available in context menu for Compare results. |
•20609598 |
Inserting node as sibling gets object reference error. |
The following are the noteworthy known issues of this patch for Data Relationship Management.
Description |
|
•23514770 |
When copying a repository from SQL Server to Oracle, can get error on "Not Null" columns when value is an empty string. |
•23056836 |
FDMEE integration using non-ASCII characters (FDMEE bug 23051532) When using non-ASCII characters for a target app and location name, the DRM import or export profile does not automatically happen. A workaround is to manually execute the import/export in DRM. Precondition: |
•21464822 |
Email notification for workflow request is displayed in English when server locale and browser settings set to non-English. |
•17883800 |
When loading a file via the Migration Utility, the File Checksum will display "Not Found; file may have been modified!" even when the file has not been modified. |
•16828903 |
After installing and starting DRM,
opening web client gets |
•16339614 |
In certain environments using an Oracle repository, performance for operations such as saving versions can be degraded over previous releases. This appears to be limited to very specific configurations. |
•13889243 |
Core child list and descendant list properties only return the first 100 entries. |
•13789734 |
Node type property search displays “Specified node not found” error for an existing node. |
•11905795 |
Error occurs when attempting to process a query from a Java application through Web Services. This issue happens in the drm-api-adapter when it attempts to serialize the objects as SOAP to feed to the Java web service. To work around this issue, edit the drm-apiadapter.exe.config file, under the <system.serviceModel> section. Under <behaviors>, <endpointBehaviors> add a new behavior: <behavior name="httpBehavior"> <dataContractSerializer maxItemsInObjectGraph="2147483647"/> </behavior> Apply this new httpBehavior to all the http endpoints, located under <services>, <service name="Oracle.Drm.APIAdapter" ...> by adding the behaviorConfiguration="httpBehavior" attribute. For example: <endpoint address = "Automator" name="IAutomatorMgr" binding="basicHttpBinding" contract = "Oracle.Drm.Interfaces.IAutomator" bindingNamespace="http://www.oracle.com/drm/"/> will become: <endpoint address = "Automator" name="IAutomatorMgr" binding="basicHttpBinding" behaviorConfiguration="httpBehavior" bindingConfiguration="basicHttpConfiguration" contract = "Oracle.Drm.Interfaces.IAutomator" bindingNamespace="http://www.oracle.com/drm/"/> This attribute must be inserted on all of the endpoint elements. |
•11668780 |
After upgrade, no way to view version type for Translog export with As-Of version |
•10648889 |
Console gets "Operation failed" error when database name contains dot operator |
•10647639 |
After upgrade, Admin password not reset to value entered during configuration |
The following are the noteworthy known issues of this patch for Data Relationship Management Analytics.
Defect Number |
Description |
•22266880 |
On Windows 2012 using Internet Explorer with language settings either Simplified Chinese (zh_CN) or Traditional Chinese (zh_TW), the Analytics pages display in English. Need to apply Web Logic Server patch ARU17935230 to resolve this. |
To apply this patch release:
1. Perform a backup on the databases for any existing Data Relationship Management applications. Database backups should be performed when Data Relationship Management service is stopped.
2. Save a backup copy of the drm-config.xml file found in the .\DataRelationshipManagement\server\config directory.
3. Uninstall the existing 11.1.2.4 release:
a. Stop the Data Relationship Management service.
b. Verify all processes are shut down.
c. Run the installer from that release and choose the Remove option.
4. Run the new setup.exe to install this patch release.
5. If a multiple-machine configuration is being used, repeat the uninstall and install steps above for each machine.
6. When using an Oracle repository and upgrading from a Data Relationship Management release prior to 11.1.2.4.330, run the following statement for the current schema owner for each application to be updated:
GRANT CREATE TYPE, CREATE SEQUENCE TO <user>;
7. In the Configuration Console on the application controller machine, select Application, then Apply Updates for all existing applications.
8. Make sure to save any configuration changes made in the Data Relationship Management Console.
9. Start the Data Relationship Management service.
Redeploy the Data Relationship Management Web service application (oracle-epm-drm-webservices.ear) to Oracle Weblogic. The oracle-epm-drm-webservices.ear file is located in the %EPM_ORACLE_HOME%\products\DataRelationshipManagement\api directory.
This step is only required if applying this patch to an installation where the Web service application has been previously deployed. See the “Redeploying a Web Services Application” section in the Oracle® Fusion Middleware Security and Administrator's Guide for Web Services for instructions to redeploy using Oracle Enterprise Manager.
Note: There are no changes in this patch for Data Relationship Management Analytics.
To install the Data Relationship Management Analytics module, refer to the Oracle Data Relationship Management Installation Guide for instructions. To upgrade the Data Relationship Management Analytics module from a previous release:
1. Stop the WLS Admin Server.
2. Stop the Oracle DRM Managed Server.
3. Run script upgrade.cmd (Windows) or upgrade.sh (Linux)
4. Enter requested information for EPM Domain.
5. Start the WLS Admin Server.
6. Start the Oracle DRM Managed Server.
To roll back this patch:
1. For each machine where Data Relationship Management is installed, run setup.exe and choose the Remove option.
2. Restore the databases for any existing Oracle® Data Relationship Management applications from the backup files created during step 1 of Applying This Patch.
3. Restore the saved backup of the drm-config.xml file to the .\DataRelationshipManagement\server\config directory.
4. If the oracle-epm-drm-webservices.ear package from this patch was deployed on Oracle Weblogic, the oracle-epm-drm-webservices application deployment should be undeployed.
5. Reinstall the previous release.
See the “Undeploying a Web Services Application” section in the Oracle® Fusion Middleware Security and Administrator's Guide for Web Services for instructions to undeploy using Oracle Enterprise Manager.
To uninstall the Data Relationship Management Analytics module:
1. Ensure that the WLS Admin Server is running.
2. Stop the Oracle DRM Managed Server.
3. Run script uninstallAll.cmd (Windows) or uninstallAll.sh (Linux)
For additional information, see the “Deploying Applications” section in the Oracle® Fusion Middleware Administrator's Guide.
Copyright © 2017, Oracle and / or its affiliates. All rights reserved. http://www.oracle.com